柴式長晶法之爐體修改生長8吋矽單晶之熱場和流場與氧氣傳輸數值模擬;Numerical simulation of thermal field, flow field and oxygen transport in modified Czochralski furnace to grow 8-inch silicon crystal

NCU Institutional Repository > 工學院 > 能源工程研究所 > 博碩士論文 > Item 987654321/95120

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/95120

题名:	柴式長晶法之爐體修改生長8吋矽單晶之熱場和流場與氧氣傳輸數值模擬;Numerical simulation of thermal field, flow field and oxygen transport in modified Czochralski furnace to grow 8-inch silicon crystal
作者:	林冠宇;Lin, Guan-Yu
贡献者:	能源工程研究所
关键词:	柴氏長晶法;坩堝設計;加熱器設計;絕緣層設計;Cz;crucible design;heater design;insulation design
日期:	2024-07-11
上传时间:	2024-10-09 16:18:57 (UTC+8)
出版者:	國立中央大學
摘要:	在本研究使用數值模擬研究了在柴氏長晶法(Czochralski crystal growth，Cz)的過程中，爐體內的不同結構設計對熔湯內的熱場、流場和氧傳輸的影響，並在模擬中加入尖點形磁場。研究結果顯示，加大坩堝尺寸可以加大熔湯自由表面的面積並增加氧雜質的蒸發量，還可以降低熔湯和坩堝壁的接觸面積，進而減少氧雜質的析出。接著，透過縮短側加熱器長度，使得側加熱器的熱集中點遠離坩堝底部，因此坩堝底部的溫度降低，進而減少從坩堝壁底部析出的氧雜質，此區域也是晶體內氧雜質的主要來源。最後，透過在側加熱器下方加入L形絕緣層，此絕緣層可以避免熱散失，加強爐體的保溫效果，同時也可以解決熔湯中心底部發生過冷的問題，並且降低晶體內的熱應力和點缺陷，進而提升晶體品質。爐體結構設計優化後可以使晶體/熔湯界面的氧濃度比原先的爐體結構降低約6.6 ppma，且加熱器的功率也可以減少了約10.3%的能耗，而晶體中心的界面高度可以減少約6.3 mm。;This study uses a numerical simulation method to study the effects of different furnace structural designs on the thermal field, flow field and oxygen transport in the silicon melt during the Czochralski crystal growth process of a cusp-shaped magnetic field. The results showed that increasing the crucible size can enlarge the area of the free melt surface and increase the evaporation of oxygen impurities. It can also reduce the contact area between the silicon melt and the crucible wall, thereby decreasing the dissolution of oxygen impurities. Furthermore, by shortening the length of the side heater, the concentration point of heat from the side heater is moved far away from the bottom of the crucible, resulting in a decrease in temperature at the bottom crucible. Therefore, it reduces the oxygen impurities dissolved from the bottom crucible wall, which region serves as the primary source of oxygen impurities within the crystal. Finally, by adding the L-shaped insulation below the side heater, heat loss is prevented, thereby strengthening the insulation effect of the furnace. This also solves the problem of overcooling at the bottom of the silicon melt center and reduces thermal stress and point defects within the crystal, thereby improving crystal quality. Optimizing the furnace structure can reduce the oxygen concentration at the crystal/melt interface by approximately 6.6 ppma compared to the original furnace structure. Moreover, the power consumption of the heater can be reduced by approximately 10.3%, and the interface height at the center of the crystal can be decreased by about 6.3 mm.
显示于类别:	[能源工程研究所 ] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	45	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....