English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41991207      線上人數 : 1857
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/86182


    題名: 加濕效應對加壓型甲烷固態氧化物燃料電池碳沉積影響;Effect of Humidification on Carbon Deposition of A Pressurized Solid Oxide Fuel Cell
    作者: 王稚元;Wang, Chih-Yuan
    貢獻者: 能源工程研究所
    關鍵詞: 加壓型甲烷固態氧化物燃料電池;甲烷蒸氣重組;水煤氣轉換;穩定性測試;碳沉積;Pressurized Methane-fueled Solid Oxide Fuel Cell;Methane Steam Reforming;Water-gas Shift Reaction;Stability Test;Carbon Deposition
    日期: 2021-10-26
    上傳時間: 2021-12-07 12:13:52 (UTC+8)
    出版者: 國立中央大學
    摘要: 本論文量測加濕效應與壓力效應對甲烷固態氧化物燃料電池(Solid Oxide Fuel Cell, SOFC)電化學性能、碳沉積與電池穩定性之影響。採用實驗室已建立之加壓型SOFC測試平台,使用鈕扣型陽極支撐電池(Ni-YSZ/ YSZ/ LSC-GDC),於操作壓力p = 1 atm 與3 atm和操作溫度750°C,進行四種不同濕度比例之甲烷作為陽極燃料,以steam to carbon ratio (S/C)定義,分別為(1) S/C = 0 (50 sccm CH4 + 150 sccm N2)、(2) S/C = 0.25 (50 sccm CH4 + 12.5 sccm H2O + 137.5 sccm N2) 、 (3) S/C = 0.5 (50 sccm CH4 + 25 sccm H2O + 125 sccm N2) 以及(4) S/C = 1 (50 sccm CH4 + 50 sccm H2O + 100 sccm N2),陽極總體積流率為200 sccm;陰極則是通入200 sccm的空氣。實驗結果顯示:在p = 1 atm下,甲烷加濕效應可使SOFC功率密度提升14% ~ 26%,最大提升值發生在S/C = 0.25,這是因為甲烷蒸氣重組反應將CH4轉換成H2,得以有效地降低活化極化與濃度極化。再者,壓力效應與加濕效應結合明顯降低SOFC極化阻抗,例如加濕甲烷在p = 3 atm和S/C = 0.5條件下,其電池性能比起常壓和S/C = 0.5條件下之性能高出62%。在p = 3 atm和S/C = 0條件下,於 SEM與XRD影像觀測到有大量的碳沉積聚集於燃料進口處,這是因壓力效應加劇了甲烷與陽極鎳觸媒直接裂解的速率,提高S/C可藉由甲烷蒸氣重組,與水煤氣轉換反應抑制於燃料進口處之碳沉積,達到延長電池壽命的目的。綜合以上結果,顯示加壓型甲烷SOFC配合適度加濕,未來可與直接燃燒甲烷(天然氣主要成份)之微氣渦輪機結合,發展分散式高效率複合式發電系統。;This study meassures the effect of humidification on carbon deposition for a pressurized methane-fueled solid oxide fuel cell (SOFC) using anode-supported button full cell (ASC: NiO-YSZ/ YSZ/ LSC-GDC). Experiments are conducted in high-pressure SOFC testing platform. The experimental conditions are two operating pressures p = 1 atm and p = 3 atm at T = 750 °C. The anode fuel is supplied by methane with four different steam to carbon ratio (S/C): (1) S/C = 0 (50 CH4 + 150 N2), (2) S/C = 0.25 (50 CH4 + 12.5 H2O + 137.5 N2), (3) S/C =0.5 (50 CH4 + 25 H2O + 125 N2), (4) S/C =1 (50 CH4 + 50 H2O + 100 N2) at a total flow rate of 200 ml min-1, and the cathode is supplied by air at a total flow rate of 200 ml min-1 for all four cases . Results show that steam-methane reforming can improve power density and reduce both activation and concentration polarization noticeably. Moreover, the maximum power density is formed to be at S/C = 0.5 with p = 3 atm, which significantly increase of 62% as compared with that at p = 1 atm and S/C = 0.5. The scanning electron microscope (SEM) and X-ray diffraction (XRD) images show great amount of carbon deposition at S/C = 0 with p = 3 atm. The carbon deposition can be suppressed by increasing S/C under steam-methane reforming and water-gas shift reaction, which is turn extends the cell durability. This suggests that the pressurized methane-fueled SOFC is feasible for the future development of the hybrid power system integrating with micro gas turbines.
    顯示於類別:[能源工程研究所 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML143檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明