先進鋪設技術於市區道路施作之應用 -以懸臂式滾壓設備為例;Application of Advanced Paving Technology in Urban Road Constructions- Take Cantilevered Roller as an Example

NCU Institutional Repository > 工學院 > 土木工程學系碩士在職專班 > 博碩士論文 > Item 987654321/85565

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/85565

题名:	先進鋪設技術於市區道路施作之應用 -以懸臂式滾壓設備為例;Application of Advanced Paving Technology in Urban Road Constructions- Take Cantilevered Roller as an Example
作者:	王威凱;Wang, Wei-Kai
贡献者:	土木工程學系在職專班
关键词:	市區道路;鋪面檢測指標分析;AHP 層級分析;舖築技術;Urban Roads;Pavement Inspection Indicators Analysis;Analytic Hierarchy Process;Paving Technology
日期:	2021-08-23
上传时间:	2021-12-07 10:58:52 (UTC+8)
出版者:	國立中央大學
摘要:	本研究因目前土木於道路工程之應用層面上面臨大缺工的時代，因此需要針對新工法、新材料、新設備、新技術等面向進行分析，其中又以管線工程現場鋪設之成果作為探討目標，並從設備改良端下手，進而申請相關的專利，在設備調整更新後，針對技術與工法進行改良，在案例分析中更輔以循環經濟新材料的引進做為整體研究之發展與成果更新之績效。研究首先針對設備改良進行探討，先了解目前道路工程所使用之鋪面鋪設設備之應用，並針對目前的舖裝設備進行改良，研發出將小型滾壓設備以懸臂式方式懸掛於挖土機把手上，進而透過懸臂之力量來提升管線鋪設時的滾壓強度，並將其新設備之理念進行專利研究之申請，並透過AHP 層級分析來找出其工程實際案例應用之成效。最後發現，管線工程導入懸臂式滾壓設備之應用可以提升底層壓實度的不足，更可以針對面層的平坦度與修編處理。;This research is facing a lack of labor at the current application level of civil engineering, new construction methods, new materials, new equipment, and new technologies, are the key to overcome the current situation. Taking the results of pipeline construction as the research target, improve technology and construction methods after the update of the equipment, the introduction of circular economy materials is implemented as the performance of research development. The research discusses the improvement of equipment, understands the application of the current paving equipment used in road engineering, and improves the current paving equipment. A method is developed, suspending small rolling equipment on the handle of the excavator, through the power of the cantilever of the excavator, the rolling strength was improved. The concept of this method is applied for a patent, through the analytic hierarchy process to find out the effectiveness of its actual engineering case application. The application of cantilever rolling equipment in pipeline engineering can improve the lack of compaction of the bottom layer, it can also handle the flatness and repair of the surface layer.
显示于类别:	[Executive Master of Civil Engineering] Electronic Thesis & Dissertation

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	126	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....