具輕載高效率之LLC諧振式電源設計與實現;High Efficiency Design for Converters under Light Load

NCU Institutional Repository > 資訊電機學院 > 電機工程學系碩士在職專班 > 博碩士論文 > Item 987654321/72203

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/72203

题名:	具輕載高效率之LLC諧振式電源設計與實現;High Efficiency Design for Converters under Light Load
作者:	余宜璋;Yu,Yi-Chang
贡献者:	電機工程學系在職專班
关键词:	輕載高效率;LLC諧振電源;3脈衝型式控制;high efficiency under light load;LLC converters;3 pulse patter
日期:	2016-08-31
上传时间:	2016-10-13 14:31:49 (UTC+8)
出版者:	國立中央大學
摘要:	本論文旨在研究和解決電源於輕載時，效率非最佳化的問題。一般電源供應器設計考量以最重載為主。但實際實用上，大部份時間，電源操作在中載或輕載，如PC 500W的電源，大部份時間操作於130~250W，而愈輕載操作時，其效率將愈低。為解決輕載和中載也能提高其效率的問題，傳統的解決方式會採用突變模式控制，來降低切換損失並改善效率，然而傳統的突變模式會導致輸出不穩定、輸出漣波過大和輕載效率非最佳化。因此本文採用了非導通時間調變來降低輸出漣波過大的問題，並利用了3脈衝模式控制來解決輸出不穩定並優化輕載的效率，並以NXP1916實作出此驅動器，實現輕載高效率的電源供應器。 ;This thesis aims to study and solve the power supply efficiency problem that occurs during non-optimization usage. The power supply design was built for full load power, however most of the time the power contained in the operation is light load or middle load. For example, a PC 500W power supply often operates at 130 ~ 250W. Therefore, if the power supply is not running at or near full capacity, the level of efficiency is not satisfactory. To solve the light load and the middle load issues, designers generally use mutation mode control to reduce switching losses and improve efficiency. Although, traditional mutation patterns can lead to unstable output. The output ripple is too large when using mutation mode control, and light-load efficiency is not optimized. This article is a non-conductive time modulation study focused on reducing the problem of oversized output ripples and the use of the three-pulse mode control to fix unstable output and optimize light load efficiency. In this particular thesis we utilize the PSU component NXP1916 to verify that the light load improves efficiency.
显示于类别:	[電機工程學系碩士在職專班] 博碩士論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	1141	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing

数据加载中.....