English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41991011      線上人數 : 1770
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋

    子類別

    博碩士論文 [2899/2899]
    期刊論文 [897/897]
    考古題 [328/328]
    研究計畫 [67/67]

    社群統計


    近3年內發表的文件: 352(8.40%)
    含全文筆數: 4191(100.00%)

    文件下載次數統計
    下載大於0次: 4191(100.00%)
    下載大於100次: 3700(88.28%)
    檔案下載總次數: 2044874(5.04%)

    最後更新時間: 2024-11-28 02:29

    上傳排行

    資料載入中.....

    下載排行

    資料載入中.....

    RSS Feed RSS Feed
    跳至:
    或輸入年份:
    由新到舊排序 由最舊的開始

    顯示項目151-200 / 4191. (共84頁)
    << < 1 2 3 4 5 6 7 8 9 10 > >>
    每頁顯示[10|25|50]項目

    日期題名作者
    2023-07-31 基於快速狀態相關微分形式黎卡迪方程式導控策略對於機動目標的攔截於預先規畫之方向;Fast Maneuvering-Target Interception at Pre-Specified Orientation Based on the State-Dependent Differential Riccati Equation Scheme 吳睿軒; Wu, Ruei-Syuan
    2023-07-28 精密鑄造冷接缺陷及疏鬆缺陷的形成機理及改善方案:以316L不鏽鋼渦流閥件的數值模擬與實驗驗證為例;The formation mechanism and correction plan of cold shut and porosity defects in investment casting: Numerical simulation and experimental verification of 316L stainless steel vortex flowmeters 陳庭儀; Chen, Ting-Yi
    2023-07-28 熱處理對IN 718鎳基超合金多孔金屬 微結構和機械性質之影響;Effect of heat treatment on microstructure and mechanical properties of IN 718 nickel based superalloy metal foam 李士揚; LI, SHIH-YANG
    2023-07-28 應用CNC 強力刮齒於直齒面齒輪齒面拓樸修整之數學模型建立;Mathematical Modeling of Applying CNC Power Skiving on Tooth Surface Topology Modification for Spur Face Gears 陳宏桂; Quy, Tran Hoang
    2023-07-28 應用CNC強力刮齒於螺旋面齒輪加工之數學模型建立;Mathematical Modeling of CNC Power Skiving Process for Manufacturing Helical Face Gears 黎可桂; Qui, Le Khoe
    2023-07-27 磁場輔助電化學放電加工藍寶石基板之研究;Sapphire Substrate Machining by using Electrochemical Discharge Machining with Magnetic Field Assisting 李宗陽; Lee, Tsung-Yang
    2023-07-27 精微產品組裝的智能人機協作系統;Intelligent Human-Robot Collaboration System for Fine Product Assembly 楊仁皓; Yang, Jen-Hao
    2023-07-27 應用分治法於刀具壽命預測模型之研究;Application of Divide and Conquer Approach to Tool Life Prediction Model 王治全; Wang, Chih-Chuan
    2023-07-27 應用於專案排程之混合蟻群演算法;Hybrid Ant Colony Optimization for Project Scheduling 謝益修; Hsieh, Yi-Hsiu
    2023-07-27 YOLOv7 模型於小物件檢測之改良與應用;Application of Improved YOLOv7 on Small Object Detection 周彥廷; Chou, Yen-Ting
    2023-07-27 不同背景音影響下之腦波分析 梁昭敏; Liang, Chao-Min
    2023-07-27 以田口法探討取樣方法對成型螺孔之牙型填充率及成形最大扭矩量測結果之影響 廖晨祐; Eric
    2023-07-27 以實驗設計方法探討取樣方法對於成形螺孔之牙型填充率及攻牙扭矩量測結果之影響 王謝縈; Wang, Hsieh-Ying
    2023-07-27 半導體設備精密電源參數實驗設計-非對稱雙極脈衝DC濺鍍氮化鋁薄膜之微觀組織與機械性質最佳化分析 周威宇; Zhou, Wei-Yu
    2023-07-27 多層堆疊氮化鋁壓電薄膜之應力梯度與變形行為研究;Stress Gradient and Deformation Behavior of Multilayer Stacked AlN Piezoelectric Films 袁寧袖; Yuan, Ning-Hsiu
    2023-07-27 兩階式行星齒輪機構電腦輔助設計系統;Computer Aided Design System for Two-Stage Planetary Gear Drives 何國華; Ho, Kuo-Hua
    2023-07-27 具ETE齒廓諧波齒輪設計及強力刮齒加工方法之研究;A Study on Gear Design and Power Skiving Methods for Harmonic Drives with ETE Tooth Profile 黃士芳; Huang, Shih-Fang
    2023-07-27 微型軸向發電機之優化與設計 黃兆于; Huang, Zhao-Yu
    2023-07-26 冷鏈系統之鋁基蓄冷材之腐蝕抑制研究;On the corrosion and corrosion inhibition of the Al-storage vessel in the coolant used in cold chain 黃彬晏; Huang, Bin-Yan
    2023-07-25 光纖收發器緊湊熱模型 陳霈祺; Chen, Pei-Chi
    2023-07-25 基於PVT數據應用實驗設計法優化射出成型參數對PP試片體積收縮率的影響;Optimization of injection molding parameters effecting on volumetric shrinkage of PP specimen using design of experiment based on PVT data 顏廷育; Yen, Ting-Yu
    2023-07-25 椎板間穩定器對於非骨融合手術初期生物力學影響 甘立鳴; Gan, Li-Ming
    2023-07-25 離岸風力分機塔架於不同疲勞工況之應力分析及共平面裂縫之疲勞裂縫成長分析 吳柏澄; Wu, Bo-Cheng
    2023-07-24 連續柴氏長晶法爐體設計之熱傳與氧氣傳輸數值研究;Numerical Investigation of Continuous Czochralski (CCz) Furnace Designs on Heat and Oxygen Transport 陳宗駿; Chen, Chung-Chun
    2023-07-24 聚光型太陽能輔助高溫甲烷裂解產氫之研究;Research on Concentrated Solar Power-Assisted High- Temperature Methane Cracking for Hydrogen Production 陳宜楷; Chen, Yi-Kai
    2023-07-24 選擇性雷射熔融 Inconel 718合金之疲勞裂縫成長評估模式研究 范萬加; Fan, Wan-Jia
    2023-07-22 物理氣相傳輸法生長 6 吋碳化矽單晶之熱場與熱應力數值模擬分析;Numerical Simulation Analysis of Thermal Field and Thermal Stress of 6-inch Sick Single Crystal Growth by Physical Vapor Transport Method 丁芷馨; Ting, Chih-Hsin
    2023-07-20 多元進料質子陶瓷燃料電池與質子交換膜燃料電池複合動力系統之熱力分析研究;Thermodynamic Analysis of Protonic Ceramic Fuel Cell-Proton Exchange Membrane Fuel Cell Hybrid Systems Fed by Hydrocarbon Fuels 吳侑叡; Wu, Yu-Jui
    2023-07-20 超音波振動輔助電化學放電加工石英晶圓陣列微孔之研究;Ultrasonic Vibration Assisted Electrochemical Discharge Machining of Quartz Wafer Micro-Hole Arrays 王岱璟; Wang, Tai-Ching
    2023-07-20 銲接件振動應力消除模擬並以類神經網路進行預估;Simulation of Vibration Stress Relief of Weldments and Prediction with Artificial Neural Network 李柏泓; Li, Bo-Hong
    2023-07-19 化學氣相沉積法合成二硫化鉬於矽基材料之可控性及變異性研究;A study on the Controllability and Variability of Synthesizing Molybdenum Disulfide on Silicon-Based Materials by Chemical Vapor Deposition 陳宗賢; Chen, Tsung-Hsien
    2023-07-19 以COMSOL有限元素軟體模擬車用觸控裝置的振動行為;Simulating Vibration Behavior of Car Touchscreen Devices Using COMSOL Multiphysics 張庭維; Chang, Ting-Wei
    2023-07-19 快速退火對TiAlCrNbVZr系中熵合金微結構和機械性質影響之研究;Effect of rapid heating rate annealing on the microstructure and mechanical properties of TiAlNbCrVZr medium-entropy alloy 宋庭瑋; Song, Ting-Wei
    2023-07-19 使用低損傷電漿改質於提升二維通道電晶體電傳輸特性;Using low-damaged plasma modification to improving electrical transport properties of two-dimensional-based transistors. 莊佳洋; YANG, ZHUANG JIA
    2023-07-19 電解質陰極界面微結構設計以提升固態氧化物燃料電池性能之研究;Effect of Electrolyte And Cathode Interface Microstructure on the Performance of Solid Oxide Fuel Cells 吳嘉恩; Wu, Jia-En
    2023-07-19 應用倒傳遞神經網路整合基因演算法優化射出成型成品之體積收縮;Optimizing volumetric shrinkage of injection molded part via hybrid BPNN and GA 林祥憲; LIN, SIANG-SIAN
    2023-07-14 結合反應曲面法與蟻群演算法探討尼龍6之纖維複合材料射出成型縫合線強度最佳化;Optimization of weld line strength for injection molding process parameters of Nylon 6 fiber composites using response surface methodology coupled with ant colony optimization 辛維朗; Hsin, Wei-Lang
    2023-07-14 微量元素添加對AlTiCrMnV中熵合金之微結構觀察與其機械性質研究;Effect of Minor Element Addition on the Microstructure and Mechanical properties of AlTiCrMnV Medium Entropy Alloys 陳鼎易; Chen, Ding-Yi
    2023-07-13 CMOS MEMS電容式磁感測器設計與應用;DESIGN AND APPLICATION OF CMOS MEMS CAPACITIVE MAGNETIC SENSOR 楊鈺琳; Yang, Yu-Lin
    2023-07-13 超快雷射薄石英晶圓微鑽孔研究;Research on Micro-drilling of Thin Quartz Wafer Using Ultrashort Pulsed Laser 李韋廷; Lee, Wei-Ting
    2023-07-12 混合結構化與非結構化四邊形網格之自動化區 域劃分方法發展 戴宇辰; Tai, Yu-Chen
    2023-07-11 CAD模型體積分解技術之優化及改進 余晉歡; Yu, Jin-Huan
    2023-07-11 ICP-RIE乾蝕刻製程應用於AT-cut石英晶圓之研究;Research on dry etching process applied to AT-cut quartz wafer by ICP-RIE 洪章凱; Hung, Chang-Kai
    2023-07-11 Thermodynamic Assessment of PCFC-GT-ORC Hybrid System with External Steam Reformer for Various Fuels 范亞迪; BEKTI, ADITIYA FAJAR
    2023-07-11 自動化多邊形分解與結構化網格生成方法研究 鄭旭佑; Cheng, Hsu-Yu
    2023-07-11 應用於非結構化四邊形網格建構之輪廓撒點與網格品質改善技術發展 陳定輝; Chen, Ting-Hui
    2023-07-05 第三類半導體高效能微波拋光表面技術;Third-generation semiconductor high performance microwave planarization surface technology 姚峻閔; Yao, Jun-Min
    2023-07-04 以人工智慧模型預測雷射切割鋼板寬度;Artificial Intelligence-Based Model for Kerf Width Prediction in Laser Cutting of Electrical Steel Sheet Using Vibration Signals as Inputs 陳國欽; Kusuma, I Putu Andhi Indira
    2023-07-04 高壓高溫化學計量預混正丁醇/空氣和第三丁醇/空氣燃氣之層流和紊流燃燒速度量測;Laminar and Turbulent Burning Velocities of Stoichiometric Premixed n-Butanol/Air and tert-Butanol/Air Mixtures Under High-Pressure, High-Temperature Conditions 胡翰德; Mahdhudhu, Fathin Muhammad
    2023-06-29 以粉末冶金及熱壓擠製方式製作石墨-鋁基複合材料之研究;Study on Graphite-Aluminum Matrix Composites Fabricated by Powder Metallurgy and Hot Extrusion 張銘鳳; Chang, Ming-Feng

    顯示項目151-200 / 4191. (共84頁)
    << < 1 2 3 4 5 6 7 8 9 10 > >>
    每頁顯示[10|25|50]項目

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明