The analysis and investigation on the microelectrode fabrication by electrochemical machining

NCU Institutional Repository > 工學院 > 機械工程研究所 > 期刊論文 > Item 987654321/26896

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/26896

题名:	The analysis and investigation on the microelectrode fabrication by electrochemical machining
作者:	Fan,ZW;Hourng,LW
贡献者:	機械工程研究所
关键词:	N/A
日期:	2009
上传时间:	2010-06-29 18:02:43 (UTC+8)
出版者:	中央大學
摘要:	Electrochemical machining (ECM), also called the electrolysis machining, has become more and more important in micro-machining in recent years. In this paper, a 510 mu m tungsten rod was used as the anode, and nickel plates were used as the cathode to fabricate the micro-pin used in scanning tunneling microscope (STM) by electrochemical polishing. Different from the needle shape in STM, a cylindrical shape of microelectrode is desired for the application in electrochemical drilling. The influence of working parameters on the electrode shape is investigated. Experimental results show that low applied voltage, high concentration electrolyte and an appropriate rotation of electrode are preferred to fabricate microelectrodes with diameter less than 100 mu m. A higher rotational speed may result in an electrode of conical shape. (C) 2009 Elsevier Ltd. All rights reserved.
關聯:	INTERNATIONAL JOURNAL OF MACHINE TOOLS & MANUFACTURE
显示于类别:	[機械工程研究所] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	484	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing