English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 42424659      線上人數 : 1098
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/25773


    題名: 一維車流系統之動力學研究;The Study of The Dynamics of The One-dimentional Traffic Flow
    作者: 黃佳伶;Chia-Ling Linda Huang
    貢獻者: 物理研究所
    關鍵詞: 壅塞;顆粒狀系統;塞車;交通;Traffic;Granular;Jamming
    日期: 2010-01-26
    上傳時間: 2010-06-11 16:13:38 (UTC+8)
    出版者: 國立中央大學圖書館
    摘要: 藉由『跟車模型』(car following model),我們探討一維車流系統的動力學行為。根據原模型,我們額外引入車距因素以及一防止超車的repulsive Lennard-Jones potential,以期使我們的模型更貼近真實系統。我們所控制的是週期性單線道高速公路。我們觀察其上壅塞發生的過程。此壅塞是由不明顯的車輛擾動所引起的。基本圖型(the fundamental diagram)在此篇論文中會被討論。 從我們的觀察中發現,當車流系統的密度高於某個門檻時,系統會趨向不穩定而容易造成壅塞。壅塞的形成過程可分為三階段: 一、堆疊與過塞;二、和緩;三、穩定存在。根據模擬的結果,當達成穩定態時,車輛會重複前車的行為。兩者相差一段時間差τ。從我們的研究中發現,τ約為1.1秒。我們將τ帶回原運動方程式,回推車輛的加速及減速過程。我們發現在不形成壅塞的前提下,密度最高只可達到每公尺0.67 輛車;而壅塞形成所需要的最低密度需為每公尺0.03輛車。此外,此壅塞移動的速率約為每秒1.36公尺。 We study the dynamics of the one-dimensional traffic flow through a car following model [1] which first proposed by Chandler et. al. We modify this model by introducing a distance factor and the repulsive Lennard-Jones potential to prevent car overtaking. The system that we are interested in is the one lane highway with the periodical boundary condition. The evolution of the jam which is caused by the unobvious perturbation was observed, and the fundamental diagram is shown. The traffic flow would become unstable and forming the jam when the density goes beyond a threshold. The jam forming process can be divided into three stages: (1) piling and overshooting, (2) releasing, and (3) steady. From the observation of the numerical results, we propose the conjecture of repeating motion which states that after reaching the steady state, the vehicle would repeat the motion of that in front by a time shift τ. Our study reveals that τ was about 1.1 seconds. Substituting τ into the equation of motion, the accelerating and the decelerating curves of a vehicle are reconstructed. We conclude that the highest density which was reachable without the traffic jam is 0.66 cars per meter, and the minimum density required for the jam forming is 0.03 cars per meter. Furthermore, the propagating speed of the cluster is -1.36 m/s.
    顯示於類別:[物理研究所] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML641檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明