中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/1733
English  |  正體中文  |  简体中文  |  Items with full text/Total items : 80990/80990 (100%)
Visitors : 45475552      Online Users : 4276
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
Scope Tips:
  • please add "double quotation mark" for query phrases to get precise results
  • please goto advance search for comprehansive author search
  • Adv. Search
    HomeLoginUploadHelpAboutAdminister Goto mobile version


    Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/1733


    Title: 氧化鋅奈米粒子之光致螢光性質研究;A study on the photoluminescence properties of ZnO nanoparticles
    Authors: 張家誠;Chia-cheng Chang
    Contributors: 材料科學與工程研究所
    Keywords: 奈米粒子;氧化鋅;光致螢光;nanoparticles;photoluminescence;ZnO
    Date: 2007-09-28
    Issue Date: 2009-09-21 11:28:57 (UTC+8)
    Publisher: 國立中央大學圖書館
    Abstract: 本研究發現由濕化學方法所成長的氧化鋅奈米粒子具有一些特別的光激發螢光性質。反應時間的拉長可以抑制已二醇相中氧化鋅奈米粒子的可見光發光,同時增強近能帶邊緣輻射。 亞麻仁油酸表面改質的氧化鋅奈米粒子,再旋轉塗佈至矽晶片上,做硬化處理前後的螢光譜型幾乎一樣。跟在乙二醇分散液中的液態樣品相比,藍紫外光部分有稍微的藍位移。 將氧化鋅奈米粒子包覆二氧化矽後,取出的固態粉體可以抑制藍紫外光的發光,使樣品只做可見光波段的發光。此樣品經700℃的燒結後,還可提升可見光波段發光強度約2倍。如果此材料可在環氧樹脂固化過程中與其均勻混合,則有應用在白光發光二極體的潛力。 The photoluminescence property of the ZnO NPs produced by wet chemical process was studied in this research. With the increase of reaction time, the visible luminescence was suppressed and the near- band-edge emission was enhanced. Therefore, if visible luminescence was the target, the reaction time should be kept short. The above produce ZnO NPs was further modified with linoleic acid as ligand and coated on silicon wafer. The photoluminescence spectra of coated film before and after thermal cure were identical. A photouminescent hybrid hard coat could thus be obtained. When ZnO NPs were capped with silicon dioxide, the blue-UV emission shrunk, so that only visible luminescence was left. This was true whether the NPs were produced by short or long reaction time. However, short reaction time produced brighter visible luminescence. The luminescence intensity could be further enhanced by almost 2 times after sintering at 700oC for one hour. This material has potential in the application on white LED if it can completely mixed with epoxy resin during curing process.
    Appears in Collections:[Institute of Materials Science and Engineering] Electronic Thesis & Dissertation

    Files in This Item:

    File SizeFormat


    All items in NCUIR are protected by copyright, with all rights reserved.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明